SilverHolder Dynamic White Car Hood LED Strip Installation Guide

Step 1. Test the product before installation

Use the car battery as the power source.

The product in the video is not the same as here, but the principle is the same.

  • The red wire is connected to the positive pole;
  • The black wire is connected to the negative pole;
  • The product should light up immediately after powering up.

Car batteries are located in different places in different vehicles. Most models hold the battery under the bonnet in one of the front corners. However, some batteries are located in the car boot to balance weight distribution. Check your vehicle handbook to find the location of your model’s battery.

Once you’ve checked your handbook, the car battery should be easy to identify. Look for a black, box-shaped battery with two large cables connected to the top. These cables are the positive and negative electrical terminals. Most car batteries measure around 6 by 10 inches, so you shouldn’t be able to miss yours.

 

Step 2. Red wire connects to car ACC  / Black wire connect negative