FAQ-LED Headlight

No, we didn’t send the wrong one.

The only thing LED bulbs do, is to emit light.

Install the 9005 bulb into the car’s low beam position, it is the low beam. Install it into the position of the car’s high beam, it is the high beam.

Many vehicles use halogen bulbs, which are very low in brightness and not conducive to night driving.

You can select your vehicle in our garage to get the matching bulb model.

Please note: If your vehicle already has an LED bulb or Xenon bulb, you do not need to replace it.

Don’t worry, we’ll take care of it for you.

1. Send us your car’s make, model, and year.
2. Take a photo of your car’s headlights.

(Optional) 3. The best way is to just take off the original halogen bulb from the car and take a photo.

The retrofit assembly needs to see what lens is used inside, different lens with different bulb models, also need to check if there is enough space to install, because there is a fan behind the LED headlights, larger than halogen, so we need you to send: 1.
1. a photo of the current light slot space
2. a picture of the headlight and socket, this is to prevent mistakes.

We provide the adapter for free, please send us the original socket or the picture of the adapter and we will send it to you immediately.

[There are more than 20 types of adapters, and since different car brands use different adapters, we can’t send you the headlights together when we send them, unless you let us check in advance whether your car needs the right H7 adapter.]

How do I replace the headlight bulb on my <2013DodgeRam1500Express>?

The best way is to search on Youtube.

Use your vehicle +replace the headlight bulb

Car headlight H4 installation👉https://vimeo.com/647198229

Car headlight H4 (with dust cover) installation👉https://vimeo.com/754614781

Car headlight H7 installation👉https://vimeo.com/667662357

Car headlight L06 base + H7 installation👉https://vimeo.com/668099872

Car headlight M3H7+ L06-B adapter installation👉https://vimeo.com/670140653

Car headlight L02 base + H7 installation👉https://vimeo.com/688336206

Car headlight 9005/9006 installation👉https://vimeo.com/732334432

Car L04/L05/L17/L18 installation👉https://vimeo.com/736423212

Car headlight H1 installation👉https://vimeo.com/739853505

Our bulbs are quality inspected at the factory to make sure it works well, so you don’t need to worry about quality issues.

We can find 90% of the problems in just a few simple steps.

1. The LED light plug is divided into positive and negative poles. If it does not light up, the positive and negative poles may be reversed. You can insert the plug in reverse. For specific operations, please refer to the video https://vimeo.com/755457796. If the positive and negative poles are reversed and still do not light up, replace and install the left and right bulbs to see if the bulbs will light up.
2. If step 1 does not work, you need to test whether the bulb itself is faulty: please connect the bulb to a 12V power supply. For specific methods, please refer to the following instructions and demonstration video.

How to test the bulb in advance?

Step 1: Prepare a 12v power supply and a hard wire.
Step 2: Connect the positive and negative poles of the hard wire to the plug of the bulb;
Step 3: Turn on the power

👉Click here to view the video

H1 H7 9005 9006 9012 H11 These lamps are all driven with canbus function, which can solve more than 95% of decoding problems.

Some vehicles, such as Jeeps. After installation, if there is still a problem of flickering or faulty light after the lamp is installed, you need to add a dedicated decoder. Please send the video of the flashing or faulty light problem to our customer service mailbox, and we will help you solve it as soon as possible.

Simply put, it may not be rotated to the correct position.The lamp beads should be facing the left and right sides.

If the problem is not solved after rotating the position.

Find a flat wall, 3-4 meters away from the wall, after turning on the low beam or high beam, take a light pattern or video on the wall, as shown in the picture, and send the picture or video to our customer service email support@silverholder.com.

Our engineers can only know the corresponding solution through the light pattern;

The lamp beads should emit light from the left and right, and the concentrating effect of this angle is the best. should not be tilted

When the LED wick emits light, it will generate heat. That’s why we have a fan at the end of our bulbs.

For customer experience, we use the best materials and technologies.

If it’s plastic or something, attach to the LED wick. They may burn due to the high temperature, which may cause smoke. Please take out the bulb and make sure that the LED wick is not covered by foreign objects.

All headlights have drivers, otherwise the car’s dashboard will have a fault prompt.

The difference is that some are built-in and some are external